These 5V White Flexible LED strips are supplied on a 5M roll, each roll containing 300 LEDs. They are extremely versatile and can be used in a wide variety of lighting applications. The 5M white flexible LED strips can be cut to size easily as they are broken up into 300 sections, marked by a cutting line. Each flexible section contains an LED, a limiting resistor, and solder pads. The strips also feature a 3M tape rear side, so the strips can be easily fixed in place to your project. You can achieve a wider spread of LEDs around a project by separating the strips into 1 LED section and rejoining the sections together with lengths of wire. The strips require a 5V supply and when lit, have a generous viewing angle of 120 degrees and are 1440-1560 lumens. The LEDs are high flux surface mounted 2835 LEDs.Each single LED section is rated for a maximum supply of 21mA@5V. Note: Though these strips are very flexible, care should be taken not to bend them around very sharp corners/angles as this may cause them to become damaged. Each single LED section is rated for a maximum supply of 21mA@5V. Features: 5V White Flexible LED strips on a 5M roll, with 300 LEDs per roll. The LEDs are high flux surface mounted 2835 LEDs. They are extremely versatile and can be used in a wide variety of lighting applications. The reels can easily be split into single LED sections, along the clearly marked cutting line. Each flexible section contains an LED, a limiting resistor, and solder pads. It also features a 3M tape rear side, for ease of fixing. The strips require a 5V supply. Each single LED section is rated for a maximum supply of 21mA@5V. The LEDs have a viewing angle of 120 degrees. 1440-1560 lumens. Contents: 1 x White Flexible LED strip, 300 LEDs, 5VDC, 5m Roll. Dimensions: Reel Length: 5M. Section Length: 16.6mm. Section Width: 8mm. Requires: Soldering Iron. Solder.