BlueThese 12V Yellow Flexible LED strips are available in 0.5m and 5m lengths, with 30 LEDs per 1/2 meter, which gives a total of 300 LEDs in a 5m reel. They are highly versatile and can be used in a wide variety of lighting applications. These Blue flexible LED strips can be cut to size easily as there are cut points every 5cm. Each 5cm section contains 3 LEDs and solder power pads. Sections can easily be joined together with lengths of wire to get the desired amount of coverage in your project. The strips are adhesive-backed and run off a 12DC supply. When lit, they have a generous viewing angle of 120 degrees. The LEDs are based on surface-mounted 3528 LEDs. These reels of LEDs are rated for a supply current = 200mA per 0.5m length. Note: Though these strips are very flexible, care should be taken not to bend them around very sharp corners/angles as this may cause them to become damaged. A maximum length of 5m should not be exceeded when connecting these strips in series. Features: Based on a 3528 surface mount LED. It runs from a 12V DC supply. Supply current = 200mA per 0.5m length. Adhesive backed. 30 LEDs per 1/2 meter, giving 300 LEDs in a 5m length. Strips can be cut into shorter lengths. Cut points every 5cm. Three LEDs per 5cm section. Multiple sections can be soldered together to make longer lengths. Tape width 8mm. Thickness 0.2mm + LED height (approx. 1.8mm). LED output 250 - 300 (lm). Contents: Blue Flexible LED strip - 30-way, 12V Dimensions: Length: 5m. Width: 8mm. Height: 2mm (nominal).