Gear Drive Professional Printing Press - 400 x 700mm
Vendor
Gear Drive Professional Printing Press - 400 x 700mm
P693C
Product code: P693C
Product Description
Gear Drive Professional Printing Presses. 400 x 700mm.
The difference between these printing presses and our lower cost P690 presses so you can expect a cast aluminium frame fitted with 80mm diameter steel pressure rollers which give a press force of 1000kg.
The 2.7:1 ratio gearbox makes the handle turn more easily. The distance between the top roller and the plate bed can be adjusted to maximum of 18mm allowing thicker etching plates/wood blocks to be used with this press.
Requests for a 43mm capacity can be accommodated as a special order, please contact us for a quotation.
The plate bed is covered with a 2.5mm thick zinc plate to ensure longevity and a smooth running surface.
Each press is supplied with a plate bed and felt blanket and four bolt holes for bench top fitting.
Oiling or greasing the moving parts of the press from time to time is vital to keep it running smoothly. Oil the roller bearings by using the oil holes on both sides of the body of the press near the lower roller and the oil holes in the bearing stones of the top roller. Oil or grease all moving parts like the sliding surfaces of the bearing stones, the thread of the two handles and the bearing rolls for the printing plate. This will stop it from seizing up, making it easier to run prints through the press.
The difference between these printing presses and our lower cost P690 presses so you can expect a cast aluminium frame fitted with 80mm diameter steel pressure rollers which give a press force of 1000kg.
The 2.7:1 ratio gearbox makes the handle turn more easily. The distance between the top roller and the plate bed can be adjusted to maximum of 18mm allowing thicker etching plates/wood blocks to be used with this press.
Requests for a 43mm capacity can be accommodated as a special order, please contact us for a quotation.
The plate bed is covered with a 2.5mm thick zinc plate to ensure longevity and a smooth running surface.
Each press is supplied with a plate bed and felt blanket and four bolt holes for bench top fitting.
Oiling or greasing the moving parts of the press from time to time is vital to keep it running smoothly. Oil the roller bearings by using the oil holes on both sides of the body of the press near the lower roller and the oil holes in the bearing stones of the top roller. Oil or grease all moving parts like the sliding surfaces of the bearing stones, the thread of the two handles and the bearing rolls for the printing plate. This will stop it from seizing up, making it easier to run prints through the press.
Gear Drive Professional Printing Presses. 400 x 700mm.
The difference between these printing presses and our lower cost P690 presses so you can expect a cast aluminium frame fitted with 80mm diameter steel pressure rollers which give a press force of 1000kg.
The 2.7:1 ratio gearbox makes the handle turn more easily. The distance between the top roller and the plate bed can be adjusted to maximum of 18mm allowing thicker etching plates/wood blocks to be used with this press.
Requests for a 43mm capacity can be accommodated as a special order, please contact us for a quotation.
The plate bed is covered with a 2.5mm thick zinc plate to ensure longevity and a smooth running surface.
Each press is supplied with a plate bed and felt blanket and four bolt holes for bench top fitting.
Oiling or greasing the moving parts of the press from time to time is vital to keep it running smoothly. Oil the roller bearings by using the oil holes on both sides of the body of the press near the lower roller and the oil holes in the bearing stones of the top roller. Oil or grease all moving parts like the sliding surfaces of the bearing stones, the thread of the two handles and the bearing rolls for the printing plate. This will stop it from seizing up, making it easier to run prints through the press.
The difference between these printing presses and our lower cost P690 presses so you can expect a cast aluminium frame fitted with 80mm diameter steel pressure rollers which give a press force of 1000kg.
The 2.7:1 ratio gearbox makes the handle turn more easily. The distance between the top roller and the plate bed can be adjusted to maximum of 18mm allowing thicker etching plates/wood blocks to be used with this press.
Requests for a 43mm capacity can be accommodated as a special order, please contact us for a quotation.
The plate bed is covered with a 2.5mm thick zinc plate to ensure longevity and a smooth running surface.
Each press is supplied with a plate bed and felt blanket and four bolt holes for bench top fitting.
Oiling or greasing the moving parts of the press from time to time is vital to keep it running smoothly. Oil the roller bearings by using the oil holes on both sides of the body of the press near the lower roller and the oil holes in the bearing stones of the top roller. Oil or grease all moving parts like the sliding surfaces of the bearing stones, the thread of the two handles and the bearing rolls for the printing plate. This will stop it from seizing up, making it easier to run prints through the press.
