Slab Roller
Vendor
Slab Roller
M420A
Product code: M420A
Product Description
Slab Roller.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide, 910 x 1010 x 1210mm (H x W x L).
Supplied in four boxes and requires assembly.
Instructions supplied.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide, 910 x 1010 x 1210mm (H x W x L).
Supplied in four boxes and requires assembly.
Instructions supplied.
Slab Roller.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide, 910 x 1010 x 1210mm (H x W x L).
Supplied in four boxes and requires assembly.
Instructions supplied.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide, 910 x 1010 x 1210mm (H x W x L).
Supplied in four boxes and requires assembly.
Instructions supplied.
